A Simple Guide to Better Understanding Fiber Optic Installation
Ease of installation is the main reason why fiber optic cables are becoming popular in this modern day and age. In the past, if you want to establish some sort of connection, you have to deal with complicated and heavy cabling. You no longer have to deal with these issues if you use fiber optic cables because they are not just very flexible and lighter but also much easier to install. In terms of the installation process of fiber optic cables and other wire cables, they are still the same, more or less. And yet, when it comes to the tools, method, and instruments used, they are never the same.
When it comes to the installation of fiber optic cables, you can choose between different methods of them. There are basically two major applications for these cables; the first one being for indoor underwater purposes and the second one being for outdoor underground purposes. With the many cables and applications for fiber optics, you cannot pinpoint only one process of its installation. However, there are general rules to properly installing fiber optic cables or any cable for that matter. To discover more about these guidelines, make sure to view here for more. Even if you will be hiring the professionals to do the job of network cable installation for you, at least you have some idea of the process.
Site survey: The special needs of your location will say a lot about how the cables must be installed that is why this process must be done. You can learn more about what physical hazards and environmental hazards lie along the way. Surveying the site also aids in being able to make a good plan on the placement of the machinery as well as the route of the cables. This plan is very much essential for installing fiber optic cables in spas and pools.
Cable stretching plan: Before any cable must be installed, planning of splice settings, access point and junction locations, and cable pulling equipment requirements must be determined. For lightning protection, have a complete system prepared with the right fiber type from the side glow one to the end glow one.
Avoid twisting cables and exceed its bend radius: If you twist your fibers, you are adding stress on them allowing them to have limited efficiency. See to it that you do not practice this one when you are applying your cables for lightning. Moreover, so as to avoid breaking your fiber optic cables and damaging them, never exceed beyond their bend radius. With your bend radius, it should be twenty times smaller than the diameter that you have for your cable. And in terms of its diameter, the bend upon final installation must be ten times smaller.
Lessons Learned from Years with Services
A Simple Plan: Networks